Sweeney Todd Analysis Essay Example for Free

Sweeney Todd Analysis EssayThe stage was quite large with a multi-level array. B) The set was dimly lit before the show and eerie music was vie to create a spooky atmosphere. C) Before the show, I could tell that there was going to be a lot of shady actions taking place referable to the appearance of the dingy street range. D) Sweeney Todd took place on a proscenium stage, where the audience was looking in upon the scene as if a wall were missing. E) The billet come outed to have adequately met the needs for the production, because the set was very tall and involved several methods of moving from level to level. SCENERYA) The set consisted of several run-down instal fronts with very dim fire and an early 20th century London feel. The top level of the set held the barber shop near stage right, and a bedroom balcony at stage left. The bottom level housed the bakery and the basement of the bakery, which included a glowing fire oven. B) The age and nature of the buildings hi nted at the view and time of the base. The implied shadiness of the set foreshadowed about the nature of the characters. C) The colors of the set involved many shades of grey and brown, with the inclusion of red lighting at times.D) The designer was very successful in the set design, because it was easy to visualize the intended setting due to the use of area lighting. When a portion of the set was not involved in the scene, it was blacked out making it easier to focus on the scene at hand. E) I felt that the bright red lighting flame from the oven was very symbolic, in that it went hand-in-hand with a shrill sound effect that was played every time a character was killed. The lighting and the sounds symbolized Sweeney Todds revenge. COSTUMESA) The beggar fair sexs costume portrayed that she was homeless due to the dirty rags that made up her put. The style of clothing (length and material of the dress) hinted at the time as well. Pirellis costume was very flamboyant which matc hed his over confident and swindling personality. His personality was lots only skin deep, and his costume played perfectly with the front he was put on. B) The dingy colors of the beggar womans clothes fit the homeless role well and also played well with the concept of property her identity secret until the end of the show.Her clothes did not make her stand out on stage. Pirelli, on the other hand, wore bright red with ruffles, making him seem bright and villainous at the same time. C) The designer did very well with the costumes, because they fit the characters personalities. For example, Mrs. Lovett was a very bold and outspoken woman, therefore her large, fluffy dress represented her well. LIGHTING A) The lighting was kept seemingly dim throughout the show, which upheld the dreary, somber atmosphere in the scenes.B) The lighting seemed to portray night more often than day, as it only seemed to brighten when the focus was on Johanna. Red lighting was used to show when a charac ter was killed and dumped into the oven. C) The most obvious use of lighting to portray emotion was the red, fire-like light that would emerge from the oven when a character was killed. Also, when Sweeney Todd was intended to appear as a man thirsty for revenge, he was encompassed in befog and the light created shadows on his face. ACTING A-B) Sweeney Todd was excellent in my opinion. He wore a grey shirt with brown pants and suspenders.His body language was high-strung and cause but also haggard and aged at the same time. The beggar woman was played with great success as well. The show progressed without much guardianship being brought upon her until her identity was revealed to Todd and the audience. She wore a bonnet and a dirty dress, and she was usually somewhat crouched to make her seem unimportant. Both of these characters performed well in singing their musical theater numbers as well. C) The scene where Anthony was serenading Johanna as she sat on the balcony served as a n impressive portrayal of the connection between them.Johannas singing was very high-pitched. gratuitous to say it was hard not to notice the signifi hoboce of this scene. I also enjoyed the murder scenes, simply because of the operational barbers chair that doubled as a trap door leading to the downstairs oven. D) Every actor gave stellar performances in my opinion. E) The whole team had great chemistry and the show progressed without a hitch. The opening scene involved most, if not all, of the characters singing and moving in unison, and it was virtually seamless. DIRECTINGA) The director was trying to show the audience how revenge can drive a person to do some very crazy things, and the result was a success. B) Everything about the show conglomerated together successfully to create the setting and the emotional atmosphere. The overall uneasy, creepiness was constructed and supported well by the lighting, costumes, and scenery. C) Only the love scenes between Anthony and Johanna strayed away from the eeriness of the story, but even then the audience could star possible turmoil to come. D) The movement and timing was excellent throughout the show.With bodies dropping down trap doors and synchronized group movements, the blocking was much without flaw. TEXT A-B) The secret plan is out of chronological order because it starts with the townspeople burying Todd. He then arises to tell his tale, which consists of the judge ruining his life by exiling him. The plot of Todds story involves him meeting Mrs. Lovett and working to seek revenge on the judge and anybody else who stands in the way. The playwright is emphasizing the power that the motivation of revenge can have on a person.C) The conflict entails the judge having custody of Todds daughter, Johanna, and Todds efforts to retrieve her and kill the judge. D) Sweeney Todd eventually kills the judge, the beggar woman, and Mrs. Lovett, and then he is killed by Toby. This leaves Johanna to be with Anthony. E) As an editor, the only thing I would change about the show would be the length of the musical numbers throughout the show. They seemed longer than necessary and I felt as though some important information was unnecessarily presented in lyrics instead of straight dialogue.

Construct and test an anemometer Essay Example for Free

Construct and test an anemometer EssayReadings 1-5 Results for calculated arouse fixedness The anemometer will be adequate to mea sure to a degree of accuracy of two tenfold places, giving it a resolution of 0. 01ms-1. This is because the least certain measurement of distance, the diameter of the anemometer was measured to two decimal places. This therefore restricts the accuracy of the anemometer to two decimal places when calculating cheat on step on it. A standardization curve for strength variance against speed is now potential When taking my results, I may find that I encounter bend speeds of over 2. 51ms-1. I predict that as the potential passing in mV increases, so will the rpm in a directly proportional manner, above 160 rpm. 80mv means an rpm of around 155 and a wind speed of 2. 51ms-1. The value for the rpm is the calculated mean from the 5 results taken. I substructure assume that for the amount of electromotive force involved in this practical, the rela tionship amid rpm and speed will remain linear. Therefore, I am going to extrapolate the calibration curve, to give me values for wind speed that relate to loftyer(prenominal) potential residuals being obtained.There will be a point where the relationship between the p. d and rpm will become non-linear. But I do not think that with the wind speeds I will encounter, this limit will be reached. An example of the kinds of rpm involved when the relationship between voltage and rpm may not be linear is when a similar type of motor is used in a motorised milk whisk, or model train. Both these motors are powered by 3v dc. This is a potential difference 75 times greater than produced by the motor turning at an average of 73 rpm.A wind speed 75 times greater than the wind speed for an average of 73 rpm is 89ms-1 this is around 200mph. This is precise unrealistic, and the anemometer would not survive in such conditions. Therefore, I estimate that I will only encounter wind speeds at most, up to 18ms-1 (40mph). Up to this point I would suggest that the relationship between the potential difference and rpm would remain linear enabling me to calculate wind speed for potential differences of over 80mV. Results The table above shows the results obtained measuring the wind speed.I encountered several problems during the taking of the results. To obtain several(predicate) potential differences, I needed to obtain different wind speeds. To do this I went to the sea front, and found different points along the sea front where the wind was b petty(a)ing at different speeds. It was very difficult to faultlessly obtain a potential difference exactly equal to those recorded for long enough to read off the value for the datum at the alike(p) time. The wind source during the calibration was constant, and therefore fluctuations in the potential difference were minimised.As wind is not at all constant the task of arrangement the results was made harder. To record the results nece ssary to determine the accuracy of the anemometer, I found different wind speeds along the sea front and as accurately as possible gained a potential difference as close to those stated in the table. At the same time I measured the wind speed that created this potential difference using the datum. The results are not consistent with the findings from my calibration. Therefore I am able to analyse these results and the factors which contributed to the inaccuracy of the anemometer that I devised.As I predicted I encountered wind speeds fast enough to produce a potential difference greater than 80 mV. Using calculated data, I would have predicted that the correspond wind speed was 2. 84ms-1, using values from Appendix 1. In fact using the datum I recorded a wind speed of 8. 20ms-1. The graph shows that the expected values for wind speed, produced from the calibration are all outside. This obviously relies upon the assumption that the datum is accurate, which I dissolve do. The resu lts show that as the potential difference created by my anemometer increases, the inaccuracy increases.Both sets of results are linear showing that the calibration was successful to a certain degree, but now using this data I can analyse and explain why the results I achieved were inaccurate. Although they are inaccurate, they are not anomalous as they follow the predicted pattern. Analysis There were several factors during the calibration that could have led to these inaccurate results. Firstly, when the anemometer was placed in a very narrow wind stream, the returning cups did not have to pass done the same wind which was turning the cups.This means there would have been less ambience resistance during the calibration than when recording results. Contextually, this means that a potential difference of 50 mV created during the taking of results may correspond to a potential difference of 60 or 70 mV created during the calibration. This agrees with the results recorded, although t he degree of inaccuracy is greater than this suggested difference. In actual fact using values from Appendix 1, the potential difference required to produce a wind speed equivalent to that recorded for 50 mV using the datum (4. 72 ms-1) is between 140 and 150mV.Another factor to suggest that the absence of air resistance during the calibration had an effect can also be seen on the graph. The inaccuracy of the results increases as the potential difference increases. This can also be explained using the same idea. During the calibration, a potential difference of 50 mV was calculated to correspond to a wind speed of 1. 51 ms-1 this means the returning cups were not encountering the resistance created by this corresponding wind speed. This can be compared to a potential difference of 80 mV where a corresponding value of 2. 51 ms-1 was calculated.The returning cups would therefore not be encountering a greater air resistance (because of the faster wind speed), increasing the inaccuracy of the results. The main factor that contributed towards the inaccuracy of the results, which encompasses the previous explanation is the inefficiency of the anemometer. As the winds energy was transferred from linear kinetic energy, to roundabout kinetic energy (through the centre axle) into electrical energy (through the motor utilising the generator effect). At each stage energy will be lost, therefore devising the values obtained for each rpm inaccurate.The inefficient transfer of energy was caused by several factors these were friction in the motor, sound created by the turning of the cups, and mainly air resistance. The error seen in the results is a magisterial error as all the results were similarly inaccurate the speed of the cups that was calculated during calibration was slower than the actual wind speed. Obviously the size of error is greater than desirable when making a sensor, but now with this knowledge the results from the calibration could be altered to encompass this systematic error.Another factor that affected the accuracy of the results from the calibration was the inclusion of user error when measuring the time period for x number of flashes. For example, if I measured 40 flashes in 5. 50 seconds, but due to slow reactions or an error the time it took for 40 flashes to be produced was only 5. 30 seconds the difference in the calculated speeds of the cups would be 0. 11 ms-1. Although this is not a lot, it would still have been influential. The success of the anemometer can be measured by analysing its effectivness in face-off the qualities desirable for a good sensor.These include a good resolution, fast response time, low systematic drift or error, appropriate sensitivity and low random variation. The sensor had a relatively fast response time the potential difference displayed on the multimeter was updated very quickly when a change of wind speed occurred. This made the data collection very different as the value kept fluctuating, although it showed a fast response time in evaluate of changing wind speed. I was able to reduce the effect that unsystematic random error had upon the results from the calibration by taking the average of the five sets of results. bittie unsystematic variations were present in all the readings that I took, but as what I was measuring (thousands of a volt) is a olive-sized quantity these small variations had a relatively large affect (this being the sensors sensitivity). The sensitivity of a measuring system is the ratio of change of output to change of input this is where the sensor became inaccurate as the multimeter did not have a sufficient resolution to create a sensitive enough sensor. The sensitivity was limited, as a very small input was inaccurately converted into a large output.This is why the results were so inaccurate, as the calculations converted very small differences of potential difference containing error (systematic and random) into relatively large values for w ind speed therefore amplifying any error that was present in the results. For this same reason, the sensors resolution was limited. In conjunction with a high level of random variation caused by the multimeters insensitivity in measuring such a small amount of potential difference, the smallest degree of potential difference that I could accurately measure was 10 mV this is ten, one thousandths of one volt.Therefore the resolution of the sensor is around 0. 15 ms-1 this is roughly the wind speed calculated from the calibration results for 10mV. This is irrelevant because of the fact that results can be calculated to 2 decimal places, as I can only be sure of results to the nearest 0. 15 ms-1 due to the sensors relatively large resolution. In comparison, the datum can accurately measure to 2 decimal places, e. g. 2. 42 ms-1. I was able to detect and explain the systematic error due to the fact that my sensor was relatively inaccurate and I had access to a much more accurate sensor de signed to measure the same thing.The use of a datum enabled me to effectively analyse my results. Overall to create a more successful sensor, I would need to review the complexity of this sensor and devise a method that reduces the margin for error as the current design encompasses too many opportunities for the results to be affected.Bibliography www. uq. edu. au Picture of Reed switch Advancing Physics AS Institute of Physics Lonsdale Science Revision guide The essentials of OCR science double award. instrumentality coursework. doc Toby Parnell.

Free

Free education EssayNearly every country in the developed world, and more and more in the developing world, provide innocent(p) primary and second-string education. Such education is generally uncontroversial and accepted as necessary around the world. In the case of secondary coil winding education, however, there is a great deal of disparity between countries education policies. In many states students must pay fees to access a shoal. Often states offer financial aid to individuals who cannot afford to pay fees and lack other methods of payment. In other states, education is completely free and considered a citizens right to attend. Debates center on the issues of whether there is in fact a right to education, and on whether states can feasibly afford to finance such education. POINT It is a fundamental right of individuals to experience primary and secondary school and to have access to the knowledge. Primary and secondary school offers a huge opportunity. It is a treasu re of knowledge to be gained and experiences to be had. Primary and secondary school provides an opportunity that exists at no other time in n individuals life.It is a time of personal, intellectual, and often spiritual, exploration. In secondary school, no such opportunities exist, as they are about instruction and following orders, not about questioning norms and conventions in the same way primary and secondary school so often. Primary and secondary school serves as a valuable space for different views, which everyone has a right to experience should they wish. A life without thinking tools provided by primary and secondary school is less full because those without it lack the facility by which to nlock all the doors of perception and knowledge.Primary and secondary school experience serves in any case individuals views of education and society, helping to give form to the relationship between citizen and state. The state has a duty to facilitate this development, as its respons ibility includes providing citizens with the wherewithal to take meaningful factor in the democratic process. A state can only truly be considered legitimate when an educated electorate approves it. Without a proper education, individuals cannot be effective citizens.A primary and secondary school education in the modern world is essential to the development of such informed citizens. For this reason, free primary and secondary school is a great benefit to a citizen as an exploration for his own development on a personal level, and with his relation to society as a whole. Counterpoint there is no right to secondary school experience. Secondary school life is a piss-up. Students rarely take their time in secondary school some would suggest. Rather, secondary school life is about community first, education second.Such education can provide valuable knowledge, but it is not the responsibility of the citizens. Self- knowledge and genuine wisdom come from study and reflection. This can be done anywhere, not Just in a secondary school. There is no fundamental right of individuals to be allowed to learn new skills that will benefit them or how to be better citizens. The states duty is to provide a service line of care, which in the case of education secondary school more than provides. If individuals want more they should pay for it themselves.

Swot Analysis Of The Home Depot

Swot Analysis Of The al-Qaeda hold onBusiness model spot Depots business model, the first of its kind in the shoes improvement industry has revolutionized the way customers shop for crime syndicate improvement harvestings. Their business model is focusing on selling home improvement mathematical products and runs to DIY, BIY, and victor customers with wide manikin of products and gross r so farue associates that are educated and knowledgeable about home improvement.Well known brand name The Home Depot, as an realized corporation, has much strength behind its name. One of the largest strengths would be that of its brand knowledge The Home Depot name has become synonymous with home improvement. Brand recognition is of substantial signifi female genitalsce to the consumer that provides a sense of trust to its customers.Extensive product offerings The Home Depot is one of the leading distributors in United States. It has wide variety of merchandise including different type s of building materials, home improvement supplies, and lawn and garden products.Convenience It is no secret that if you want anything having to do with home improvement the first roll to go is Home Depot. Home Depot has distinguished itself as the home improvement store that has what you are looking for when it comes to home improvement. Their extensive product lines drive home made The Home Depot the one stop shopping in home improvement.Training Employees in Safety The Home Depot provides a reinforced focus during the training of their employees on resort. New hires complete a training curriculum that is designed for their specific job type.Television Network(HDTV) Money saving construction that allowed HDs top executives to get instant feedback from local managers, and allowed training and communication programs to be viewed in the stores.Price The Home Depot is committed to competitive pricing. It often prices its products well below major chains. Home Depot has low price advantage due to economies of Low price scale.Service The lodge uses sophisticated assumeion criteria to select people with a customer-friendly orientation. They also value, but do not require, experience in the building trades.WeaknessesCounterbalancing the strengths of Home Depot, it also has a couple of key weaknesses that convey to be addressed.Growth Is both a blessing and a headache for Home Depot. As they exhaust expanded aggressively into new food food markets, they have seen their direct expenses rise in direct pro tract with their elicitth in revenue. While this is would be expected in most instances. This means that Home Depot is not capitalizing on economies of scale in logistics and distribution provided to them by their market intensity strategy.Decline in Customer Loyalty One of Home Depots noticeable weaknesses would be the declining customer loyalty. The decrease is not solely based on their customer service or product offering but that there is a strong p resence of strong contention in their industry. Lowes is Home Depots number one competitor in the industry. Over m Lowes has followed Home Depots way in product/service offerings and expansion. Consumers have more choices and Lowes is continuously building on their brand recognition, which spreads the consumers thin between the two rivalries.Focus of Consumers Home Depot focuses on the priapic and professional segment of the market. They should consider catering to the women and families in the market segments.Environment Competitor Lowes is generally regarded as having cleaner, smaller, b honester, more customer-friendly store.Financials With a new CEO, making drastic changes at HD and having expanded sharp decline in stock price, the morale of managers is down. As HD enters its disposition stage, share returns have declined and focal point has become less enthused. pretermit of Local Market Focus HD store managers were given great freedom in customizing their stores, from merc handising choices to employee relations.Organization structure The Home Depot former CEOs militaristic leading style and concentrate organizational Leadership style structure are main weaknesses. These are affected the performance of employee resulting in excessive layoffs.OpportunitiesBecause of Home Depots size they have some interesting opportunities available to them.With a solid foothold in North America, Home Depot testament set its sights on some other world markets to further expand and spread its business risk across many an(prenominal) diverse world markets. Expansion go forth be the original focus for growth into the year 2000.Home Depot has an opportunity in the global sourcing of their products as their scope and reach becomes global. Sourcing from other countries may significantly grow their gross margin.Home Depots Service Performance Improvement (SPI) program is due to deliver huge paybacks in productivity of night team workers. Other IT projects fructify gr eat opportunities to increase efficiency, decrease costs and further increase margins.HD is staying within its core competencies by expanding their new landscaping division. Through a strong selling research program, HD should all-encompassingy grasp what the consumer is wanting. HDs specialty in home improvement and strong name recognition, will allow them to capture a large portion of this market. HDs EXPO Design Centers are an opportunity to expand their market niche by providing say-so customers with innovative remodeling suggestions. As the EXPO centers enter more markets, they will be taking sales directly from stores such as Pier One, Bed BathBeyond , Sears , Williams-Sonoma and SAKS 5th Avenue. By specializing in high and home improvement products such as small appliances and culinary ware, patio accessories, ceiling fans and Persian rugs, people should enjoy the trendy shopping experience. HD is taking the initiative to update the appearance of their cured stores by in vesting $250 million in store remodeling in the upcoming year. They intend to transform their somewhat outdated stores into cleaner, more user friendly stores to evoke the overall shopping experience. Tool rental services had a significant extend to on HD s Gross Profitability. As the number of centers increase, so will gross profit as a percentage of sales. HD recognized a strong market potential in smaller cities surrounding large cities. By initiating the new market penetration strategy of smaller cities, HD will benefit greatly.Serving primarily to do-it-yourselfers, which is a largely recession-proof market. So, even during a recession Home Depot can survive and even make money.Offering a broad line of products that can lead to an increase in the number of customers.Restructuring management and organization is opportunity for Home Depot to improve its marketGlobalization value Globalization has always two sides like to sides of coin. The positive side of globalization is to g et efficiency and economies of scale and expanding market by internationalization.Innovation has opportunities and threats both. Opportunities are it allows Home Depot to leverage the space it has and display a multitude of product in warehouse setting so customer can see the products available and buy it on same visit.Leveraging the power of brand leadership through inclusive marketing campaigns that target pros and active do-it-yourself customers among both men and women. At the same time, we market opportunities for store growth expect to ascertain our marketing plans to capitalize on our large scale and geographic advantages.Providing customer benefits from investments in new point-of-sale systems, self- equalout, andThreatsThe biggest threats that I see for Home Depot are its competitors such as Lowes, which are trying to emulate or even take a step further every strategy used by Home Depot.Wholesale outlets can also affect Home Depot by offering lower prices to professional b usiness customers.Serving to the DIY industry can also be a threat because it is a very competitive industry and the profit margin is very low. So, if the DIY industry is not managed properly, a company might end up selling it off, like Kmart with Builders Square.Intense competition fuels business to be efficient in almost every way. Intense competition is one of the biggest threats for Home Depot right now. Home Depot has more than 25 direct competitors including Lowes, Menards, True Value, Ace Hardware, Do It Best, Sears, Target and Wal-mart.Lowes and Menards has significant market share right now.High buyer power There are high buyer power and low switching cost due to many firms in market competing among each other.Innovation The major threat of innovation is that each store must have and extremely efficient and organized warehouse supply chain operation.Globalization The negative side of globalization is different economical, political and legal condition in different nations. Different culture, people perspective and local firm also threat for firm.These risks and uncertainties include, but are not limited to, fluctuations in and the Economical conditions overall condition of the U.S. economy, stability of costs and accessibility of sourcingWeather conditions and channels, conditions affecting new store development, the companys ability to attract, trainCompetiton. and retain highly-qualified associates, unanticipated weather conditions, and the impact of competition and regulatory and litigation matters.Because of the competitive nature of the retail industry, Home Depots success depends on price, store location, customer service, and wide product selections. In each market that Home Depot serves there is a plethora of specialty home improvement stores that have the potential to cutting into Home Depots market share (Datamonitor).Home Depots overlap with primary competitor, Lowes, poses a potential threat. In the minds of consumers, Home Depot may be seen as interchangeable with Lowes which would in turn decrease customer loyalty. Also when a Lowes enters a market that is only served by Home Depot, Home Depots sales have a tendency to decrease by up to 15% (Datamonitor).As Home Depot and Lowes continue to compete head to head in primary markets and both continue their strategy of market saturation, the awareness of US market saturation becomes a very real possibility. According to Datamonitor, The US home center potential is valued at approximately 3,500 stores. With Home Depot and Lowes opening a have 300 stores a year, the industry could reach saturation in the next few long time.Because of the competitive nature of the retail industry, Home Depots success depends on price, store location, customer service, and wide product selections. In each market that Home Depot serves there is a plethora of specialty home improvement stores that have the potential to cutting into Home Depots market share (Datamonitor).Home Depots overlap with primary competitor, Lowes, poses a potential threat. In the minds of consumers, Home Depot may be seen as interchangeable with Lowes which would in turn decrease customer loyalty. Also when a Lowes enters a market that is only served by Home Depot, Home Depots sales have a tendency to decrease by up to 15% (Datamonitor).As Home Depot and Lowes continue to compete head to head in primary markets and both continue their strategy of market saturation, the awareness of US market saturation becomes a very real possibility. According to Datamonitor, The US home center potential is valued at approximately 3,500 stores. With Home Depot and Lowes opening a combined 300 stores a year, the industry could reach saturation in the next few yearsGo to Page1View as single page HD is competing head to head with Lowes. They have been thieving HDs market share with a positioning strategy of opening stores as close as possible to HD. Looming poor economic conditions present challenges for this r etailer. Declines in gross domestic product growth, employment, personal disposable income and customer sentiment are a threat to HDs sales revenues in the short term. Decreases in the economic factors would signify a impairment economy. Consumer would start a larger portion of their disposable incomeQuestions for Discussion1. What is your appraisement of Nardellis changes at Home Depot? Which had the greatest impact?In my opinion Nardelli, during the years he was The Home Depots CEO, did an overall great job. The changes he introduced to the business model were necessary to help The Home Depot to keep growing in the right direction. The Home Depot, at the time Nardelli was appointed CEO, was a company with an old style management and operations that could have compromised the future of the company. Nardelli focused on and achieved change magnitude sales and profitability, by 2006 sales had doubled from $45.7 in 2000 to $90.8, and profits had more than doubled from 2000 to 2005 t o $5.8 billion. Among all the changes he made, the ones that had the biggest impact were Geographic expansion Nardelli brought the company to Mexico were it went from home in to number one. Diversification he expanded the wholesale business with the creation of Home Depot Supply, which provided products and services to professional customers. Cost cutting measures he centralize Home Depots merchandising and purchasing which lead to an improvement of the buyer power with suppliers and better deals extending payment terms from 30 to 45 or 50 days. He also took the decision to switch full time store employees to part time employees and to reduce the number of employees in the stores.This had actually a negative impact as it certainly contributed to the erosion of the share price during the years and it actually cost Nardelli his job. Opening to different countries, having better communication system with stores and dealing with distributors in corporate level vs. locally deals. This had more potential on getting better deals.2. How did Nardellis changes affect profitability, labor productivity, and customer service? What metrics would you use to assess these impacts?The main change that Nardelli introduced that affected profitability was the centralization of the merchandising and purchasing. It is true that before 2000 the store managers were able to be closer to customers and to decide what products stock in the stores, but at the same time that was highly inefficient from an operational point of view, leading to a mismanagement of stock levels. Thanks to Nardellis new centralized approach the company was able to eliminate almost 20,000 unprofitable items and to introduce other higher priced, higher-end products which contributed to increase sales and eventually profits.Nardelli improved labor productivity thanks to heavy investments in information technology as the company was lagging behind its competitors. He started the Front End Accuracy and Service con version (FAST) initiative, through which all stores were equipped with new point of sales terminals with touch screens. Other measures taken by Nardelli that contributed improved productivity were Introduction of self check out registers. Standardizingof in-store logistic activities. Introduction of cordless scan guns. Six Sigma Approach.As mentioned above, Nardelli actually worsen the Customer service since he started his job, mainly switching the full time store employees to part time employees.The result was that customers were unhappy about the level of customer service since the part time employees were not enough watchful as the full time workers. This eventually led to the share price erosion during the years.Some of the metrics used by Nardelli to measure the productivity were pallets per minute of arc for the monitoring of the freight flow process and inventory velocity to measure the length of time it took for products to flow through stores. He also used other sort of p erformance metrics such as financial, operational, customer and people skills metrics. He definitively should have monitored closer the customer satisfaction and people skills to avoid the problems he had at the end of his career with Home Depot. Profitability increased, productivity increased however there was a decline in customer service.3. What caused the decline in customer service?Hiring more part time employees and having military backgrounder store managers. It is hard to carry a system when you have more part time employees than your full time employees. Each employee has to attend trainings and need to practice these with the customers. In this case it would be hard to monitor improvements in part-time employees and this also set up hiring and firing process. It would take more time to find out if an employee is valuable to the company. With this on mind, having more part time employees mean more job and safety training and spending more time in monitoring and hiring proc ess.On the other hand military backgrounder store managers can be seen as a strength however, compared to the previous managers they wouldnt necessarily have knowledge on materials to help their customers. Imagine a customer comes and asks about an item or a DIY project, even store manager has no idea about that.The Home Depots main competitor Lowes has more customer oriented service and has a refreshing atmosphere with employees knowledgeable in their interested fields.